No Spikes, No Squeals, No Vibration
|
|
|
Click the picture to watch a descriptive video.
|
| RampMillTM |
- Swiftcarb Rampmills ramp at 300-500% greater angles than any other cutters.
- Proprietary coatings increase tool life.
- Patent pending geometry allows for higher speeds
- Designed specifically for optimized performance with a constant tool load
|
- TruMill® toolpaths are different.
- The tool never plows into a corner.
- The motion is smooth everywhere.
- TrueMill® manages the tool engagement to create superior toolpaths.
|
|
Patented SwiftCARB RampMillsTM
+Patented TrueMill cutter path
= H.C.M. (High Cubic inch Machining)
This combination of patented technologies has resulted in dramatic cycle time reductions:
A36 - Large through holes in .750 plate.
Before RampMillTM - 5 to 8 minutes per hole. With RampMillTM - 48 seconds per hole
5083 Aluminum Armor Plate- Aircraft part.
Before RampMillTM - 46 minutes per part. With RampMillTM - 6 minutes 27 seconds per part
6Al4V Titanium Aircraft part
Before RampMillTM - 2 Hours per part. With RampMillTM - 15 minutes per part
|
STEEL RAMP AND RUN SERIES 5FL
Series "ST" FOR HEAVY RAMPING AND POCKETING
Our RampMillsTM, are designed to ramp at angles that were previously unattainable, and run
at high speeds on the floor, drastically reducing cycle times and minimizing tool changes.
• Reduce Cycle times by 30-600%
• 2X-4X Longer Tool Life
• Ramp angles up to 10°
• Mill Holes Faster Than Drilling In Many Applications |
|
