SwiftCarb Home Page
|
|
The BME2 series is longer for reaching deeper into parts. Can have a neck relief ground to order for step down machining. Elliptical gash on the ball end with 2 flutes cutting to center leaves better finishes, and is the best choice for contouring (hem stitching). When used with an MDC coating, it is the most effective ball end tool for Steels, Stainless Steels, and Exotic Alloys.
|
|
|
|
|
How To Build Your 16 Digit Part Number
|
| First 6 | Middle 6 | End Geometry | Pick 1 | Pick 1 | |||||||
| GEO | FL,LOC, | Ball | Coolant Hole | Coating | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| & DIA# | & LBS# | DIA | FL# | LOC | LBS | OAL | Nose | None | None | MDC | ALTiN |
| GM0250 | 28I005 | 0.250 | 2 | 0.500 | 0 | 3.000 | B0 | 0 | 0 | M | 2 |
| 28I007 | 0.250 | 2 | 0.500 | 0 | 3.500 | ||||||
| 2BU009 | 0.250 | 2 | 0.750 | 0 | 4.000 | ||||||
| 2CS00I | 0.250 | 2 | 1.000 | 0 | 6.000 | ||||||
| GM0312 | 28I005 | 0.312 | 2 | 0.500 | 0 | 3.000 | B0 | 0 | 0 | M | 2 |
| 28I007 | 0.312 | 2 | 0.500 | 0 | 3.500 | ||||||
| 2BU009 | 0.312 | 2 | 0.750 | 0 | 4.000 | ||||||
| 2CS00I | 0.312 | 2 | 1.000 | 0 | 6.000 | ||||||
| GM0375 | 28I005 | 0.375 | 2 | 0.500 | 0 | 3.000 | B0 | 0 | 0 | M | 2 |
| 28I007 | 0.375 | 2 | 0.500 | 0 | 3.500 | ||||||
| 2BU009 | 0.375 | 2 | 0.750 | 0 | 4.000 | ||||||
| 2CS00E | 0.375 | 2 | 1.000 | 0 | 5.000 | ||||||
| 2E600I | 0.375 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM0437 | 28I004 | 0.437 | 2 | 0.500 | 0 | 2.750 | B0 | 0 | 0 | M | 2 |
| 2BU009 | 0.437 | 2 | 0.750 | 0 | 4.000 | ||||||
| 2BU00I | 0.437 | 2 | 0.750 | 0 | 6.000 | ||||||
| GM0500 | 28I005 | 0.500 | 2 | 0.500 | 0 | 3.000 | B0 | 0 | 0 | M | 2 |
| 2BU009 | 0.500 | 2 | 0.750 | 0 | 4.000 | ||||||
| 2CS00E | 0.500 | 2 | 1.000 | 0 | 5.000 | ||||||
| 2E600I | 0.500 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM0562 | 2BU009 | 0.562 | 2 | 0.750 | 0 | 4.000 | B0 | 0 | 0 | M | 2 |
| 2E600I | 0.562 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM0625 | 2BU009 | 0.625 | 2 | 0.750 | 0 | 4.000 | B0 | 0 | 0 | M | 2 |
| 2CS00E | 0.625 | 2 | 1.000 | 0 | 5.000 | ||||||
| 2E600I | 0.625 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM0750 | 2CS009 | 0.750 | 2 | 1.000 | 0 | 4.000 | B0 | 0 | 0 | M | 2 |
| 2DG00E | 0.750 | 2 | 1.250 | 0 | 5.000 | ||||||
| 2E600I | 0.750 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM0875 | 2CS009 | 0.875 | 2 | 1.000 | 0 | 4.000 | B0 | 0 | 0 | M | 2 |
| 2E600I | 0.875 | 2 | 1.500 | 0 | 6.000 | ||||||
| GM1000 | 2DG00E | 1.000 | 2 | 1.250 | 0 | 5.000 | B0 | 0 | 0 | M | 2 |
| 2E600I | 1.000 | 2 | 1.500 | 0 | 6.000 | ||||||
| 2FK00L | 1.000 | 2 | 2.000 | 0 | 7.000 | ||||||
| GM1250 | 2DG00G | 1.250 | 2 | 1.250 | 0 | 5.500 | B0 | 0 | 0 | M | 2 |
| 2E600I | 1.250 | 2 | 1.500 | 0 | 6.000 | ||||||
| 2FK00N | 1.250 | 2 | 2.000 | 0 | 7.500 | ||||||
